Harwin’s Datamate (M80 and M83 series) connectors provide an extremely flexible interconnect solution, ideally suited for a wide variety of testing environments and conditions. Connectors are available in single, dowble and triple row configurations.
The compact design of a 2mm pitch connector, the global availability of a product range stocked in depth, the established high-reliability of a COTS connector system. Datamate has become the connector range of choice in many demanding applications on land, sea and air.
Cutaway of Datamate crimp contact, showing 4-finger Beryllium Copper contact inside
Datamate is a focus product for Harwin, and is undergoing an active development program. The new Cable Assembly Service is available for this range as a value-added service - contact us for more information.
The ultimate security and strain-relief - a variety of connector systems with a choice of slotted or hex socket jackscrew fixings, with board-mount for PCB connectors. Polarised, with #1 contact marked.
The original 2mm pitch connector system. Designed and Developed by Harwin, we are the only manufacturer supplying to British Standard 9525-F0033.
The following information is highlights from the Datamate performance characteristics for the signal contacts. Download the complete Component Specification C005xx in PDF format for more detail, and for information on the Power and Coax contacts.
|Female Contacts||High performance Beryllium Copper contact, Gold finish - Brass outer shell in Gold or Tin (over Nickel) finish|
|Male Contacts||Copper Alloy, Gold or Tin (over Nickel) finish|
|Housing||30% Glass-Filled High Temperature Plastic, rated to UL94V-0|
|Latches||Beryllium Copper, Tin over Nickel finish|
|Current (at 25°C)||3.3A max per individual contact, 3A max all contacts electrically loaded|
|Working Voltage||800V DC or AC peak (360V DC or AC peak at 30,000ft/9km/300mbar)|
|Maximum Voltage||1,200V DC or AC peak|
|Contact Resistance||25mΩ max|
|Insulation Resistance||100MΩ min|
|Operating Temperature||-55°C to +125°C|
|Humidity Classification||56 days at 95% RH|
|Vibration (with latches)||10-2,000Hz, 0.75mm, 98m/s² (10G), 6 hours total|
|Shock (with latches)||981m/s² (100G) for 6ms|
|Outgassing||Product range includes a variety of plastics - please check the Outgassing page <LINK>|
|Durability (contacts)||500 mating cycles|
|Insertion force (per contact)||2N max (M80 series), 1N max (M83 series)|
|Withdrawal Force (per contact)||0.2N min|
|Recommended Wire types||BS 3G 210 Type A, MIL-W-16878/6 type ET|
|Wire Sizes||22 to 32 AWG|
|Insulation Diameter||Ø1.10mm max for Large and Small Bore contacts, Ø0.75mm max for Extra-Small Bore contacts|
|Component Specification (including pin numbering system)||C005XX - M80- and M83 Datamate Series Connectors|
|Catalog pages||Pages 13-94|
|Product Training Modules|
|Outgassing figures||Outgassing data list|
Test Summary Reports
|HT001xx||Mechanical Endurance of M80 (testing up to 10,000 mating cycles)|
|HT002xx||Voltage Breakdown and Insulation Resistance of M80|
|HT004xx||Environmental Testing of J-Tek (Bump, Vibration, Shock, Acceleration, Electrical Load at Temperature)|
|HT005xx||Retention of L-Tek female crimps in housing, and Female Crimp Integrity (wire pull-out) at 22/24/26/28 AWG|
|HT006xx||Retention of L-Tek & J-Tek male crimps in housing, and Male Crimp Integrity (wire pull-out) at 22/24/26/28 AWG|
|HT010xx||Mechanical Testing of J-Tek Male Horizontal Surface Mount (Insertion and Withdrawal forces)|
|HT011xx||Mechanical Testing of L-Tek High Temp crimp housings|
|HT012xx||Mechanical Testing of L-Tek Male Horizontal Surface Mount (Insertion and Withdrawal forces)|
|HT015xx||Environmental Testing of J-Tek and 101Lok (Bump, Vibration, Shock)|
|HT016xx||Insertion and Withdrawal forces for L-Tek Female Crimp contact|
|HT017xx||Contact Resistance after Aging (L-Tek and J-Tek)|
|HT019xx||Frequency Test to EIA-364-108 for L-Tek (USB 2.0)|
|HT020xx||General Test on Coax and Power connectors|
|HT025xx||Detailed Environment test for L-Tek (Bump, Vibration, Shock, Acceleration)|
|HT035xx||Insertion and Withdrawal forces, Voltage proof to 1200V for Power connectors|
|HT040xx||General testing for High-Power (40A) contacts|
|HT044xx||Locking Latch (L-Tek) Integrity test|