Connectors & Hardware
No samples were found in your basket.
No immediate matches - press ENTER for extended results.
This video will help answer your questions about crimping and inserting female Datamate contacts into the appropriate L-Tek, J-Tek or Mix-Tek housing.
The same techniques shown here can also be used for male signal contacts. Please watch this video in conjunction with consulting the Instruction Sheets for crimping and for insertion.
Datamate is a high reliability connector system that withstands high loads of shock and vibration and extreme temperatures.
Gecko Crimping Instructions
Datamate Metal Backshells
Team Sonnenwagen Aachen are counting down the months until they head to Australia for the World Solar Challenge.
The Datamate Mix-Tek range is designed to hold both power and signal contacts in one c… https://t.co/j27bMUSxML
Good luck to #teamHarwin in today's Electronics Sourcing industry football match! 👟⚽️ https://t.co/e8sseteprv
© Copyright Harwin Plc 2004 - 2019. Harwin Plc Registered in England No. 509831
Registered office: Fitzherbert Road, Farlington, Portsmouth, Hampshire PO6 1RT.