Lead Forensics

Sample basket

Close

0 Products

Availability

Close

750 in stock 1 Distributors

Mouser Electronics Inc

Qty: 750 Location: Global

Go to distributor
Home > G125-MH22005L7R
Active Product

G125-MH22005L7R

10+10 Pos. Male DIL Horizontal Throughboard Conn. no Latches (T+R)

1.25mm Pitch High-Reliability Connector - Gecko with Latches

Add to Favorites

750 in stock   Check availability

10 similiar products View products

Samacsys account required

Download

No login is required

Product Description

  • Double Row male 4.7mm PC Tail connector, Surface Mount fixings (no latches) – 20 contacts (10+10). Surface Mount hold-down areas give additional strain relief when soldered to the PCB.
  • Supplied on Tape and Reel. Fixing can also be used when no board fixing is required. Gold finish on contact area and termination.
  • For complete pin numbering or pin out information, see Component Specification C125XX.

Technical Details

Specification

Contact Pitch:

1.25mm (0.049")

Contact Gender:

Male/Plug

Connector Orientation:

Horizontal

Connection Type:

PC Tail / Throughboard

Mating Pin Size:

Ø0.4mm

Current Rating:

2.8A max individual contact, 2A max simultaneous (25°C)

Operating Temperature:

-65°C to +150°C

Soldering Data:

Max Solder Temperature: 260°C for 10 seconds

Style of Latches:

Locking Latch

Polarising Features:

Yes

End Stackable:

No

Side Stackable:

No

Can be cut to another size:

No

Number of Rows:

2

Number of Signal Contacts:

20

Materials

Finish / Plating on Termination:

Gold

Finish / Plating on Contact Surface:

Gold

Base Material of Contact:

Phosphor Bronze

Housing Material:

Polyamide (Nylon) 4T

Housing Colour:

Green

Housing Material UL Rating:

UL94V-0

Packaging Style:

Tape and Reel

Dimensions

Individual Part Weight:

0.751g

Overall Dimensions (L x W x D) in mm:

15.55 x 6.20 x 10.20

Height of Connector above PCB:

5.50mm

Length of Throughboard Tail:

4.70mm

Frequently Asked Questions Ask a Question

Does this product need a pick and place cap for SMT placement?

A separate pick and place cap is not necessary (and is not supplied) – the part has an integrated flat surface that should be used for pick and place purposes. You just need to specify a vacuum nozzle of the right size.

Was this answer useful?

Downloads

TECHNICAL DOCUMENTS

TEST REPORTS

ENVIRONMENTAL COMPLIANCE

RoHS Compliant (2015/863/EU) with no Exemption required

PDF Download

INSTRUCTION SHEETS

OTHER DOWNLOADS

How can we help you?

Contact one of our technical experts via “Ask an Expert”, or book a 30 minute technical consultation.


Ask an Expert
Book a meeting