Lead Forensics

Sample basket

Close

0 Products

Availability

Close

810 in stock 2 Distributors

Farnell

Qty: 761 Location: Europe

Go to distributor

Newark

Qty: 49 Location: USA

Go to distributor
Home > P25F4026
Active Product

P25F4026

ATE Two-Part Spring Probe, 2.50mm Centres (Farnell)

ATE Spring Probe, Spring Contact, Test Probe

Add to Favorites

810 in stock   Check availability

1 similiar products View products

Samacsys account required

Download

No login is required

Product Description

  • Special packaging for Farnell, identical to standard product P25-4026.
  • Two Part Spring Probe, 2.54mm (0.1″) minimum pitch, Serrated Head – Gold finish on probe head and body.
  • Use with receptacle / sleeve S25-346 or S25-546.

Technical Details

Specification

Connector Orientation:

Vertical

Connection Type:

PC Tail / Throughboard

Current Rating:

3A max

Operating Temperature:

-40°C to +85°C

Soldering Data:

Max Solder Temperature: 260°C for 10 seconds

Polarising Features:

No

Number of Signal Contacts:

1

Materials

Finish / Plating on Termination:

Gold

Finish / Plating on Contact Surface:

Gold

Base Material of Contact:

Beryllium Copper plunger, Phosphor Bronze shell

Packaging Style:

Bulk/Loose

Dimensions

Individual Part Weight:

0.251g

Overall Dimensions (L x W x D) in mm:

33.30 x Ø1.50

Frequently Asked Questions Ask a Question

Is there a recommended insertion tool that I can use with the ATE probes and sleeves?

We do not have a specific insertion tool for our ATE test probe sleeves. If you are press-fit assembling the sleeve to a panel, you would just need to support the underside of the panel around the mounting hole, and push down on the sleeve with a flat plate. A typical bench press should be suitable. The probe should then be fitted to the sleeve by hand. There is also an instruction sheet available for these products.

Was this answer useful?

Why is there no voltage rating for this contact?

Voltage rating is calculated from the flashover voltage – the voltage at which the electricity can break down the air gap and jump between two contacts. With a single contact, the voltage rating you achieve will depend on the space you leave between two contacts, or a contact and any other conducting element. So we are unable to give a voltage rating for single contacts, as it will depend on your usage.

Was this answer useful?

Downloads

TECHNICAL DOCUMENTS

ENVIRONMENTAL COMPLIANCE

RoHS Compliant (2015/863/EU) with Exemption 6c

PDF Download

INSTRUCTION SHEETS

OTHER DOWNLOADS

Want to talk to someone?

Contact one of our technical experts via “Ask an Expert”, or book a 30 minute technical consultation.


Ask an Expert
Book a meeting