You are here Home Markets Test & Measurement, Metering
Test & Measurement Connectors
Test & Measurement Connectors
Laboratory test equipment requires reliability to ensure accuracy of data. Harwin's range of connector products and Test Probes are ideally suited and come with high quality as standard.
-
Datamate (High Reliability)
Description:
High-reliability / High performance 2mm pitch connector system, approved to British Standard 9525-F0033, has a proven track record under the most extreme conditions.
Features:
Features Harwin's 4-finger Beryllium Copper contact, to ensure integrity of connection.
Available in a variety of strain-relief options including latches and jackscrews.
Broad range of board-to-board, board-to-cable and cable-to-cable versions.
Specifications:
Resistant to 100G Shock, 40G Bump and 10G Vibration
3A max current, -55°C to +125°C operating temperature
Durability rating of 500 operations
-
Datamate Mix-Tek
Description:
High-reliability / High performance 2mm pitch connector system with added power and coax options.
Features:
Features Harwin's 4-finger Beryllium Copper signal contact, to ensure integrity of connection.
Available in a variety of strain-relief jackscrew options.
Standard configurations of signal & power, or power only, available from stock.
Specifications:
Up to 20A power contacts, 3A signal contacts
6GHz, 50 Ohm impedance coax contacts
Durability rating of 500 operations
-
HotShoe
Description:
Rugged, reliable HotShoe connector technology designed for ease of use.
Features:
Tolerant to mating misalignment, ensuring no possibility of mis-mating.
Constructed using spring-loaded contacts, maintaining a positive force against the mating connector.
Low mating force enables rapid and effortless connection for a user-friendly system.
Specifications:
Durability rating of 10,000 mating cycles
-40°C to +100°C operating temperature
1A per contact, 240Vdc rating
-
Archer - 1.27mm Pitch
Description:
1.27mm pitch industry standard connector system.
Features:
Board-to-board connector system.
Through-Hole and Surface Mount, Vertical and Horizontal.
Pin Header variants for mating height flexibility.
Specifications:
1A, 150V max current/voltage
Up to 100 contacts available
-40°C to +105°C operating temperature
-
EZ-BoardWare
Description:
Products designed to make production processes easier or eliminate extra processes altogether.
Features:
Supplied in tape-and-reel format for fully automated assembly.
Simple solutions to increase design flexibility and decrease costs.
Optimises PC board space utilization.
Specifications:
Available loose or in tape-and-reel format
Shield Clips, Shield Fingers (Grounding contact), Jumper Link, Test Point, Fuse Clip, Cable Clips and Coin Cell Battery Holder
-
2.54mm Pitch - M20
Description:
2.54mm pitch industry standard connector system.
Features:
Board-to-board, board-to-cable and jumper options available.
Through-Hole and Surface Mount, Vertical and Horizontal.
Pin Header variants for mating height flexibility.
Specifications:
3A, 250V max current/voltage
300 operations (gold), 50 (tin)
-40°C to +105°C operating temperature
-
2.00mm Pitch - M22
Description:
2mm pitch industry standard connector system.
Features:
Board-to-board, board-to-cable and jumper options available.
Through-Hole and Surface Mount, Vertical and Horizontal.
Pin Header variants for mating height flexibility.
Specifications:
2A, 250V max current/voltage
300 operations (gold), 50 (tin)
-40°C to +105°C operating temperature
-
Spring Test Probes
Description:
A selection of One- and Two-Part Spring Test Probes, for use with PCB test equipment.
Features:
Choice of probe sizes and head styles for a variety of testing conditions and .applications
Two-part probes designed for replacement of the probe in high-usage applications.
Specifications:
Up to 3A max current rating
Variety of head travel and spring forces, depending on product range
-
PCB Sockets
Description:
A range of 4-finger and 6-finger PCB sockets, designed for robustness and high-reliability.
Features:
Based on the proven 4-finger Beryllium Copper Contact used on the Datamate range.
Choice of sockets for 0.5mm, 0.8mm, 1mm and 2mm diameter mating pins.
A variety of shell designs, and also a choice of packaging options on the 0.5mm sockets.
Specifications:
From 2A to 20A max current rating, depending on socket size
-55°C to +125°C operating temperature, 10G Vibration resistant
Durability rating of 500 operations
 Connectors@large.jpg "Datamate (High Reliability)")
View other Markets in same category >>
Copyright Harwin Plc 2004-2012. Harwin Plc Registered in England No. 509831