You are here Home Markets Oil & Gas
Surface Instrumentation Connectors
Surface Instrumentation Connectors
Detection, Measurement and Exploratory systems all require high-reliability connector solutions. Stringent safety requirements and intense commercial pressures make system failures unacceptable. Harwin's portfolio includes high performance / high reliability connectors, fast-mating HotShoe connectors and space-reducing low-profile connectors on a fine pitch, with a well-established history of fulfilling these requirements.
-
Datamate (High Reliability)
Description:
High-reliability / High performance 2mm pitch connector system, approved to British Standard 9525-F0033, has a proven track record under the most extreme conditions.
Features:
Features Harwin's 4-finger Beryllium Copper contact, to ensure integrity of connection.
Available in a variety of strain-relief options including latches and jackscrews.
Broad range of board-to-board, board-to-cable and cable-to-cable versions.
Specifications:
Resistant to 100G Shock, 40G Bump and 10G Vibration
3A max current, -55°C to +125°C operating temperature
Durability rating of 500 operations
-
Datamate Mix-Tek
Description:
High-reliability / High performance 2mm pitch connector system with added power and coax options.
Features:
Features Harwin's 4-finger Beryllium Copper signal contact, to ensure integrity of connection.
Available in a variety of strain-relief jackscrew options.
Standard configurations of signal & power, or power only, available from stock.
Specifications:
Up to 20A power contacts, 3A signal contacts
6GHz, 50 Ohm impedance coax contacts
Durability rating of 500 operations
-
Datamate S-Tek
Description:
High-reliability / High performance 2mm pitch connector system with added 360 degree shielding.
Features:
Tested in general accordance with MIL STD-1377.
Features Harwin's 4-finger Beryllium Copper contact, to ensure integrity of connection.
Includes jackscrews for added strain relief.
Specifications:
30dB of RF attenuation between 10kHz and 400MHz
3A max current, -55°C to +125°C operating temperature
Durability rating of 500 operations
-
Archer - 1.27mm Pitch
Description:
1.27mm pitch industry standard connector system.
Features:
Board-to-board connector system.
Through-Hole and Surface Mount, Vertical and Horizontal.
Pin Header variants for mating height flexibility.
Specifications:
1A, 150V max current/voltage
Up to 100 contacts available
-40°C to +105°C operating temperature
-
HotShoe
Description:
Rugged, reliable HotShoe connector technology designed for ease of use.
Features:
Tolerant to mating misalignment, ensuring no possibility of mis-mating.
Constructed using spring-loaded contacts, maintaining a positive force against the mating connector.
Low mating force enables rapid and effortless connection for a user-friendly system.
Specifications:
Durability rating of 10,000 mating cycles
-40°C to +100°C operating temperature
1A per contact, 240Vdc rating
-
PCB Sockets
Description:
A range of 4-finger and 6-finger PCB sockets, designed for robustness and high-reliability.
Features:
Based on the proven 4-finger Beryllium Copper Contact used on the Datamate range.
Choice of sockets for 0.5mm, 0.8mm, 1mm and 2mm diameter mating pins.
A variety of shell designs, and also a choice of packaging options on the 0.5mm sockets.
Specifications:
From 2A to 20A max current rating, depending on socket size
-55°C to +125°C operating temperature, 10G Vibration resistant
Durability rating of 500 operations
 Connectors@large.jpg "Datamate (High Reliability)")
View other Markets in same category >>
Copyright Harwin Plc 2004-2012. Harwin Plc Registered in England No. 509831