You are here Home Markets Marine
Harwin has a long history of serving the market leaders in marine electronics, successfully providing miniature connectors and board hardware solutions for; GPS, Radar, Sonar (such as Fish Finders) and more.

High-reliability / High performance 2mm pitch connector system, approved to British Standard 9525-F0033, has a proven track record under the most extreme conditions.
Features Harwin's 4-finger Beryllium Copper contact, to ensure integrity of connection.
Available in a variety of strain-relief options including latches and jackscrews.
Broad range of board-to-board, board-to-cable and cable-to-cable versions.
Resistant to 100G Shock, 40G Bump and 10G Vibration
3A max current, -55°C to +125°C operating temperature
Durability rating of 500 operations

High-reliability / High performance 2mm pitch connector system with added power and coax options.
Features Harwin's 4-finger Beryllium Copper signal contact, to ensure integrity of connection.
Available in a variety of strain-relief jackscrew options.
Standard configurations of signal & power, or power only, available from stock.
Up to 20A power contacts, 3A signal contacts
6GHz, 50 Ohm impedance coax contacts
Durability rating of 500 operations

1.27mm pitch industry standard connector system.
Board-to-board connector system.
Through-Hole and Surface Mount, Vertical and Horizontal.
Pin Header variants for mating height flexibility.
1A, 150V max current/voltage
Up to 100 contacts available
-40°C to +105°C operating temperature

A range of miniature connectors from 0.5mm to 1.25mm pitch.
Board-to-Board connector system for 0.5 to 1.0mm pitch, Cable-to-Board for 1.25mm pitch.
A variety of mating height options available.
0.5A per contact on Board-to-Board, 1A for Cable-to-Board
Up to 100 contacts available
High-temperature moulds for Lead-Free soldering resistance
Related Links:

Products designed to make production processes easier or eliminate extra processes altogether.
Supplied in tape-and-reel format for fully automated assembly.
Simple solutions to increase design flexibility and decrease costs.
Optimises PC board space utilization.
Available loose or in tape-and-reel format
Shield Clips, Shield Fingers (Grounding contact), Jumper Link, Test Point, Fuse Clip, Cable Clips and Coin Cell Battery Holder

ZIF (Zero Insertion Force) connectors compatible with FPC/FFC standards.
Horizontal Top and Bottom contact, as well as Vertical orientations available.
Supplied in tape-and-reel format for fully automated assembly.
Surface-mount solder-down tabs for additional strain relief on horizontal connectors.
Available in 0.5, 0.8 and 1.0mm pitch variations
ZIF (Zero Insertion Force) for ease of assembly and maintenance
Up to 60 contacts available

A range of 4-finger and 6-finger PCB sockets, designed for robustness and high-reliability.
Based on the proven 4-finger Beryllium Copper Contact used on the Datamate range.
Choice of sockets for 0.5mm, 0.8mm, 1mm and 2mm diameter mating pins.
A variety of shell designs, and also a choice of packaging options on the 0.5mm sockets.
From 2A to 20A max current rating, depending on socket size
-55°C to +125°C operating temperature, 10G Vibration resistant
Durability rating of 500 operations
View other Markets in same category >>
Website development by Aardvark Media
Copyright Harwin Plc 2004-2012. Harwin Plc Registered in England No. 509831
Registered office: Fitzherbert Road, Farlington, Portsmouth, Hampshire PO6 1RT
Privacy policy | Download Help

