Products
- Product Search
- Browse Products
- Datamate
- EZ-BoardWare
- Terminals & Hardware
- Connectors
- Featured Products
- Archer - 1.27mm Pitch
- 1mm pitch Board-to-board Conn
- Datamate 101Lok
- Datamate Extended Wall
- Datamate Mix-Tek Off-The-Shelf
- Datamate Plus
- Datamate Reverse Fix
- Datamate S-Tek
- Datamate Trio-Tek
- Datamate 3-Row
- EZ-Cable Clips
- EZ-Shield Clips
- Spring Contacts
- HotShoe Connectors
- RoHS Mil-DTL-5015 Conn
- PC/104 & PC/104 Plus
- Spacers / Pillars
- Datamate EBO-Tek
- Product FAQ
- My Harwin
You are here Home Products Featured Products
EZ-Coin Cell Battery Holder
Simple, cost-effective coin cell holders provide secure retention and save installation time.
EZ Coin Cell Holders designed for auto assembly equipment.
Harwin has enhanced its range of EZ-BoardWare products with a fuller range of Coin Cell Battery Holders. The range comprises of ultra-low, single piece surface mountable coin cell holders, and a selection of insulated coin cell holders in a choice of horizontal SMT or vertical PC Tail. Low profile EZ-Coin Cell Holders provide a cost effective solution to the problem of battery mounting. Coin cells are securely held in place, yet they can be quickly and easily removed when they run down.
All holders ensure coin cell batteries are securely retained in place while cutting assembly time. Except for the Vertical PC Tail holder, EZ-Coin Cell Holders are available in Tape and Reel packaging, making them ideally suited to automatic placement systems.
| EZ-Coin Cell Holder Part No. | Battery Dimensions | Typical Coin Cell Batteries |
|---|---|---|
| S8201-46R | Ø 12mm x 2.5mm max | BR1225, CR1216, CR1220, CR1225 |
| S8211-46R | Ø 20mm x 3.2mm max | CR2032, CR2025, CR2016 |
| S8401-46 | Ø 20mm x 3.2mm | CR2032 |
| S8411-45R | Ø 12mm x 2.0mm | CR1220 |
| S8421-45R | Ø 20mm x 3.2mm | CR2032 |
Useful Links:
Copyright Harwin Plc 2004-2012. Harwin Plc Registered in England No. 509831